דף הבית » מאווררים למעבדים » מאוורר למעבד p4 775 שקט spire

מאוורר למעבד p4 775 שקט spire

100320_large

הפתרון המושלם לקירור LGA 775 בסיסים Celeron ו Core 2 מיקרו עקב עד 65 וואט.
מחיר מלא
85 ₪
מחיר באתר
67 ₪

The Minato is the selection for the cost driven pc systems of today. Straight forward specifications and cost down materials makes the Minato the perfect solution to cool the LGA 775 bases Celeron and Core 2 due micro processors up to 65W.

A all aluminum single finned omni-directional heat-sink enables sufficient heat transfer from the cpu heat source to the ambient case environment. The heat-sink is topped with a round 92mm by 25mm dc fan spinning at just 2800 RPM which makes this cpu cooler near silent.

Installation is made easy by pre-applying the heat-sink base with White, Stars-420 heat-sink interface material. This save the hassle of applying grease a the right location and amount for better contact with the processor`s heat-spreader. Another time saving feature are the pre-installed 4 mounting screws which foster flux en secure installation of the Minato.

Main features:

* Sleeve bearing black 90mm fan
* Omni-Directional aluminum heat-sink
* Near silent at only 29dBA
* Pre-applied thermal interface material
* Pre-installed solid mounting screws
* Compatible with the latest Intel micro-processors
Product Includes :
*Owner Manual *Stars-420 White grease pre-applied

    Product Specification  
Socket 775 Cooling kit
Dimensions
Heat sink :        95×95×18 mm (l × w × h)
12VDC Fan : 92×92×25 mm
Bearing Sleeve bearing
Rated speed
Cooler :        2800 RPM +/-10%
Rated power 2.85 W W
Noise level 29.0 dBA
Air flow 48.2 CFM at 2,800 RPM CFM
Current 0.30 A
Connector 3 pin, main board
Thermal resistance 0.41 oC/W
Thermal Grease Stars-420 white grease(pre-applied)
Application
Intel :   Celeron D ~ 3.2 GHz
  Celeron D ~ 2.93 GHz (340J)
Intel  :   Core 2 Duo ~ 3 GHz (775 Dual-core)
Intel :   LGA775 ~ 3.73 GHz (Prescott)
Life hours Sleeve: 30.000
Features Omni-directional, Single fin, Aluminum Heat-sink, Intel Approved Push-pin and Tool-free mounting
*All Spire CPU cooling products come with thermal compound either pre-applied onto the cooler or in an injection tube. Compound will begin to function at its optimum potential, after a gradual increase in heat-dissipation, approximately 168 hours (7days) after initial application.
* All technical data shown above are measurements from our own laboratory. Product images shown may differ from actual product. Specifications are subject to change without prior notice.

intel gaming processors
  כל הזכויות שמורות © 2009-2018  ראם סמרטק (ראם יבוא ושיווק מחשבים )
בניית אתר: TechnoCraft